Gun Accessories & Parts

Replace or upgrade your SIG MCX/MPX with this folding minimalist plus folding stock.

Add your favorite AR-15 stock to your MCX or MPX with this adapter.CAUTION: Many States and localities regulate the use and/or possession of collapsible and folding stocks. Use, or possession of this product in conjunction with certain other parts, may be illegal in some jurisdictions. It is YOUR responsibility to insure your use of this product is in compliance with all Federal, State, and local laws and regulations. ...

SIG SAUER cheek riser for the SIG MCX/MPX factory skeletonized stock. Includes: polymer cheek riser and locking insert.

SKU8901630ModelP226Caliber9mm LugerColorBlackApplicationSelf-Defense, Target Shooting, Concealed Carry, Everyday Carry (EDC), Competition Shooting, Law Enforcement / Military, Tactical, RangeLoaded Chamber IndicatorNoBarrel IncludedNoRecoil Assembly IncludedNoBarrel Length (In)4.4SightsROMEO-X PRO w/ XRAY3 Day/Night SightsOptic ReadyYesRX FootprintPROElectro-Optic InstalledYesCenter Dot Size2 MOA Red Dot / 32 MOA CirclePistol SizeFull-SizeSlide FinishNitron®Slide MaterialStainless...

The SIG SAUER P320 skeletonized factory flat trigger is a direct replacement for your stock trigger. A 30% trigger pull weight reduction compared to the stock P320 trigger. The flat trigger design gives shooters a lower position on the trigger, which will increase leverage for a smoother, more consistent pull. Finish: Titanium-Nitride (Gold Color) Installation of these parts kits requires disassembly of your firearm beyond a “field-stripped” condition. Improper installation may result in...

Barrel Compatibility: 9MMFinish: Black *Note, only for use on 9mm/ .357SIG / .40S&W fire control units (FCU). It will not function with a .45 ACP FCU.

Included: Complete slide assembly, compensator, 4.6" threaded Gold barrel, and recoil assembly.Grip module compatibility: Full size both X-Series, and non-X-Series. Only for use on 9mm/.357SIG/.40S&W firing control units (FCU). It will not function with a .45ACP FCU.Optic ready compatibility: ROMEO1-PRO, ROMEO2, Delta Point Pro, and RMR (requires sealing plate) footprint.Holster compatibility: Fits P320 XFIVE holsters.Material: Stainless SteelFinish: Black Cerakote Slide and Compensator. Gold...

Included: Complete slide assembly, compensator, 4.6" threaded barrel, and recoil assembly.Grip module compatibility:Full size both X-Series and non-X-Series. Only for use on 9mm/.357SIG/.40S&W firing control units (FCU). It will not function with a .45ACP FCU.Optic ready compatibility: ROMEO1-PRO, ROMEO2, Delta Point Pro, and RMR (requires sealing plate) footprint.compatibility: Fits P320 XFIVE holsters.Material: Stainless SteelFinish: Coyote Brown Cerakote - Slide and Compensator Nitron -...

Features of Sig Sauer P320 X-Compact Grip Module for 9mm, .40 Auto, .357SIG: Install your SIG P320 firing control unit into this Grip Module Assembly to convert to a P320 X-Series Carry chambered in 9mm, .357 SIG, .40AUTO with your selected grip size. Requires the 9mm, .357 SIG and .40AUTO slide and barrel. Please Note - The X-Series Grip Modules will not work with magazines that have SIG SAUER on the baseplate. They are compatible with the baseplates that have the SIG Mark on it. ...

includes everything except the serialized fire control unit: slide assembly, barrel, recoil spring, guide rod, sights, grip module, magwell, grip weight, and two 17 round magazines.medium grip module.only milled to accept the Romeo1 Pro/Delta Point Pro opticsslide can only be used with the X-Five Legion 5" heavy barrel.5" bull/heavy barrel without the LCI cut.can be used with P320 models chambered in 9mm, 40 S&W, or .357 SIG. It is not compatible with any P320 models chambered in .45ACP. ...

Included: Complete slide assembly, 5.0" barrel, guide rod, and (2) recoil springs.Grip module compatibility: Both the full size X and non-X series. Only for use on 9mm/.357SIG/.40S&W fire control units (FCU). It will not function with a .45ACP FCU.Holster compatibility: Fits P320-XFIVE holsters.Slide material: Stainless SteelFinish: Slide- Black Nitron. Barrel Black Nitron. Comes fully assembled. ...

Factory recoil spring assembly for the P320 Compact, XCARRY utilizing the 3.9" non-threaded barrel or the 4.6" threaded barrel. This version has our enhanced corrosion resistance coatings.

Installation of these parts kits requires disassembly of your firearm beyond a “field-stripped” condition. Improper installation may result in malfunction, serious injury, or death. SIG SAUER requires that only certified SIG SAUER armorers install these parts kits. Any damage caused by the incorrect installation of these parts kits are not covered by your firearm’s warranty, and SIG SAUER will charge for any needed repairs to a firearm damaged by improper use or installation of these parts...

The SIG SAUER P365/P365X/P365XL factory gold flat trigger is a direct replacement for your stock trigger. The flat trigger design gives shooters a lower position on the trigger, which will increase leverage for a more consistent pull. The Gold titanium-nitride finish not only looks good but also has increased lubricity which results in a smoother trigger feel. Installation of these parts kits requires disassembly of your firearm beyond a “field-stripped” condition. Improper installation may...

Color:BlackGun Make:Sig SauerGun Model:P365-XMacro

Get quicker follow-up shots with this P365X SPECTRE slide assembly featuring an integrated muzzle compensator.

A pistol that doesn't shift in your hand and fits well, will help you be a more effective shooter. Use this laser-stippled P365XL grip module if you find the standard grip to be too smooth.For use on P365XL 9MM pistols. Material: PolymerColor: Black

This slide is cut for our Romeo1Pro and is covered by our removable sight plate.Equipped with our standard height, X-ray night sights. It will also accommodate optics with the Deltapoint pro footprint. Barrel Compatibility: 9MMFinish: Black *Note, only for use on 9mm/ .357SIG / .40S&W firing control units (FCU). It will not function with a .45 ACP FCU.

This genuine SIG SAUER bolt carrier assembly is the factory replacement for the SIG MCX-SPEAR LT.

The SIG SAUER P320 factory flat trigger is a direct replacement to your stock trigger. The flat trigger design gives shooters a lower position on the trigger, which will increase leverage for a smoother, more consistent pull.

The SIG SAUER P320 factory flat trigger is a direct replacement to your stock trigger. A 30% trigger pull weight reduction compared to the stock P320 trigger. The flat trigger design gives shooters a lower position on the trigger, which will increase leverage for a smoother, more consistent pull.

Requires complete P320 Fire Control Unit and X5 or Full-size slide assembly. TXG XSeries Full Grip Module (SIG 8900036, SIG 8900274) Grip Module overall weight is 13.3oz. With the weight and magwell (not included), the total weight of grip is 16.6oz. TXG XSeries Carry Grip Module (SIG 8900674)Overall weight on Carry Grip Module: 12.3 oz. *Please note: - This grip module DOES NOT includes the extended magwell and internal weight.- The X-Series Grip Modules will only fit new style magazines with...