Magpul

Product DetailsThe Forward Sling Mount is a sling attachment point for the Remington 870 and Mossberg 500/590/Maverick series of shotguns which clamps onto the barrel and extended magazine tube. It can be configured for use with either Push-Button QD Sling Swivels or one-point clip-in style attachments such as the MS3 Paraclip, the HK hook, ITW MASH hook, and others. Made from precision cast steel that is Melonite treated for wear and corrosion resistance. Dedicated fit for the Remington 870...

The Magpul GL L-Plate fits the PMAG 17 GL9 and PMAG 15 GL9, and is made of durable reinforced polymer with a rubber overmold. Tailor made for competition or defensive use, the GL L-Plate is designed to aid in seating of the magazine into extended magazine wells and to provide positive traction and impact protection without unnecessary bulk. Available in packs of three, the GL L-Plate installs easily without tools in place of the original PMAG floor plate. Made in U.S.A. FEATURES: Designed for...

Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true drop-in solution for the end user*. This stock is also M-LOK compatible to accept a broad range of accessories. Also available is our Bolt Action Magazine Well, which allows the...

Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true drop-in solution for the end user*. This stock is also M-LOK compatible to accept a broad range of accessories. Also available is our Bolt Action Magazine Well, which allows the...

Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true drop-in solution for the end user*. This stock is also M-LOK compatible to accept a broad range of accessories. Also available is our Bolt Action Magazine Well, which allows the...

Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true drop-in solution for the end user*. This stock is also M-LOK compatible to accept a broad range of accessories. Also available is our Bolt Action Magazine Well, which allows the...

Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Hunter 700L Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Long Actions, this stock requires no bedding and is a true drop-in solution for the end user*. The 700L is also M-LOK compatible to accept a broad range of accessories. Also compatible with our Bolt Action Magazine Well 700L which allows the rifle...

Continuing the Hunter lineage, Magpul introduces the Hunter American stock. Made from reinforced polymer and an anodized aluminum bedding block with steel recoil lugs. The Magpul Hunter American stock offers users a cost-effective replacement featuring a fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Ruger American Short Action rifles, this stock requires no bedding and is a true drop-in solution for the end user. This stock is also M-LOK compatible to...

The Magpul Hunter X-22 chassis is an ergonomic, full-featured stock for the ubiquitous Ruger 10/22 rifle. Made from high quality reinforced polymer, the Hunter X-22 features an ergonomic grip, adjustable length of pull and comb height to fit a wide variety of shooters, multiple sling mounting options, a non-slip rubber butt-pad, and M-LOK slots for accessory attachment. The Hunter X-22 fits standard Ruger 10/22 .22 LR pattern rifles with no gunsmithing, and a reversible barrel tray ensures...

The Magpul Hunter X-22 Takedown chassis is an ergonomic, full-featured stock specifically designed for the Ruger 10/22 Takedown series of rifles. Made from high quality reinforced polymer, the Hunter X-22 Takedown features an ergonomic grip, adjustable length of pull and comb height to fit a wide variety of shooters, multiple sling mounting options, a non-slip rubber butt-pad, and M-LOK slots for accessory attachment. , The Hunter X-22 Takedown fits standard Ruger 10/22 Takedown .22 LR pattern...

Product DetailsThe Hunter/SGA OEM Butt-Pad Adapter allows the user to replace the factory recoil pad on Magpul SGA Remington or Mossberg Shotgun Stocks as well as the Hunter 700 Stock with a Remington 870 synthetic-pattern butt-pad of their choice (not included).By utilizing the original spacers, this adapter retains all the functionality of the Hunter and SGA Stocks while providing for additional butt-pad options.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product ...

The Magpul L-Plate is a floorplate replacement for current issue aluminum USGI 30-round magazines that incorporates a rubberized pad. Bumper pad is made of durable Santoprene rubber overmolded onto a stainless steel plate. Bumper pad is made of durable Santoprene rubber overmolded onto a stainless steel plate. Made in the U.S.A. ITAR International Traffic in Arms Regulations Controlled Product.

Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provide a rubbery surface for improved weapon control and rail protection. Easily cut for custom lengths, each panel fits one side of a carbine-length rail (18 slots). One panel per package. Manufactured by Falcon Industries, Inc. Available in Black, OD Green and Flat Dark Earth. E.A.R. Export Administration Regulations Controlled Product / ...

The versatile Light Mount V-Block and Rings is a nearly-universal mounting solution for attaching a handheld light to compatible Magpul light mounts. Constructed of reinforced polymer and milspec-anodized aluminum, the Light Mount V-Block and Rings allow the user to install lights with a body diameter from .75" to 1.04" onto the MOE Scout Mount and M-LOK Cantilever Rail/Light Mount (comes pre-installed on the Magpul Rail Light Mount). In conjunction with these compatible Magpul mounts, the...

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is " shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its...

Product DetailsDesigned for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is...

Product DetailsThe Magpul M-LOK Bipod Mount allows for the attachment of Harris-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability. The Bipod Mount is...

Designed for use with all M-LOK mounting surfaces, the M-LOK Polymer Cantilever Rail/Light Mount allows the attachment of various MIL-STD-1913 Picatinny spec rail-mounted accessories such as lights and optics, and directly interfaces with the popular Surefire M300/M600 series Scout Lights or Magpul Light Mount V-Block and Rings. The Cantilever Rail/Light Mount has Picatinny slots that extend forward .75"-1.5" past the M-LOK mounting slot to improve ergonomics and optimize accessory positioning...

The M-LOK Hand Stop Kit serves as a light weight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooters hand from reaching the hot front sight assembly or muzzle. The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other...

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments. With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical...

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly...

M-LOK Type 1 Rail Covers are low-profile and light weight covers that install directly onto M-LOK compatible systems. Made of an extremely heat resistant flexible material, these covers offer an enhanced gripping surface. At 9.5 in length they cover six full M-LOK slots but can be cut for customized length or to combine colors. Includes two Covers per package. FEATURES: Compatible with all M-LOK systems Non orientation specific - no up/down, left/right, front/back orientation Low profile and...

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards. These M-LOK Covers are non-orientation specific which allow the user to mount them in any direction desired without affecting function, feature beveled contours to minimize potential snagging, utilizes our TSP texture for additional grip, and protrudes only slightly more than 1/8" from the mounting surface to maintain a low-profile. The center locking tab is pre-scored to...

Product DetailsThe M-LOK T-Nut Replacement Set is a replacement hardware pack designed for use with all M-LOK accessories. Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two T-Nuts as well as two different length button-head cap screws to ensure compatibility with various hand guard or forend thicknesses. A self-locking reusable thread patch is added to the screws to ensure a secure fit upon installation.Made in U.S.A.E.A.R.Export...

The M-LOK Tape Switch Mounting Plate is a mount designed to attach Surefire ST pressure pads on M-LOK compatible systems. It is molded of the same high quality polymer as other Magpul products providing light weight with extremely rugged construction, and the M-LOK recoil lugs and T-Nuts make for an extremely secure mounting system. A low profile design allows the user more mounting options without interfering with other equipment and its rounded and beveled edges provides a snag free surface....

The Magpul M-LOK to MOE Adapter Kit is designed specifically to adapt many M-LOK compatible accessories to legacy MOE Hand Guards and Forends. The M-LOK to MOE adapter plates are customizable to length by snapping sections off at the pre-determined locations which help ensure a near seamless installation. Adapter plates of various sizes and all replacement hardware are included. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product ...

The M-LOK Tripod Adapter for metal M-LOK compatible hand guards or forends mounts directly onto any tripod head equipped with the common Manfrotto RC2/Q2 interface. This adapter allows the user to mount their rifle directly to a tripod head without the use of any additional saddles giving them a secure shooting platform. The M-LOK Tripod Adapter is machined from aluminum and finished in Mil-Spec anodizing which offers excellent corrosion resistance. The beveled ends and corners produce a...

The AK MagLink is a coupler for PMAG AK magazines designed for Kalashnikov pattern rifles in 7.62x39mm which allows the user to attach two magazines together for more efficient speed reloads, and to keep additional ammunition accessible on the weapon at all times. The AK MagLink features a two-piece bolt on design and durable, lightweight reinforced polymer construction, which resists operational abuse. Wide-set, two-piece design resists flexing and integral grooves interface with PMAG ribbing...

Features Fits second generation PMAG 30 and new PMAG 30 M3*Impact resistant polymer construction provides light weight and resists operational abuseWide-set, two-piece bolt on design resists flexingIntegral grooves interface with PMAG ribbing to eliminate slippage Specifications MagLink Magazine Coupler Weight: 2.8 oz. E.A.R. Export Administration Regulations Controlled Product ...

The Magpul DAKA Pouch, designed to bring organization to the dusty, dirty, and muddy world we work and play in. Made from polymer infused textiles that are welded on all seams and use a genuine YKK water resistant zipper. The construction methods and materials used mean that these pouches are at home in hard use applications like tool storage or bulk storage of your reloaded ammunition as well as lighter duties like organizing your personal electronic accessories. Although these pouches are...

The Magpul DAKA Pouch, designed to bring organization to the dusty, dirty, and muddy world we work and play in. Made from polymer infused textiles that are welded on all seams and use a genuine YKK water resistant zipper. The construction methods and materials used mean that these pouches are at home in hard use applications like tool storage or bulk storage of your reloaded ammunition as well as lighter duties like organizing your personal electronic accessories. Although these pouches are...

EASIER THAN… EASY Installs easily in secondsDirect replacement for USGI ejection port cover on forged Mil-spec upper receivers MORE RUGGED THAN METAL PORT COVERS Durable, injection-molded polymer constructionCorrosion resistant componentsWill not bend or deform from impacts

EASIER THAN… EASY Installs easily in secondsDirect replacement for USGI ejection port cover on forged Mil-spec upper receivers MORE RUGGED THAN METAL PORT COVERS Durable, injection-molded polymer constructionCorrosion resistant componentsWill not bend or deform from impacts

The Magpul GL Enhanced Magazine Well is a high performance purpose built Glock frame magazine well. Designed to fully enhance and ensure positive magazine insertion in high stress scenarios. Sleek and ergonomic design features also provide excellent concealment while ensuring minimal printing to the users clothing. Ramp and edge geometry allow for, should it be needed, positive and flawless removal of a faulty or stuck magazine during reloading or immediate action events. Made in U.S.A....

The Magpul GL Enhanced Magazine Well is a high performance purpose built Glock frame magazine well. Designed to fully enhance and ensure positive magazine insertion in high stress scenarios. Sleek and ergonomic design features also provide excellent concealment while ensuring minimal printing to the users clothing. Ramp and edge geometry allow for, should it be needed, positive and flawless removal of a faulty or stuck magazine during reloading or immediate action events. Made in U.S.A....

The Magpul GL Enhanced Magazine Well is a high performance purpose built Glock frame magazine well. Designed to fully enhance and ensure positive magazine insertion in high stress scenarios. Sleek and ergonomic design features also provide excellent concealment while ensuring minimal printing to the users clothing. Ramp and edge geometry allow for, should it be needed, positive and flawless removal of a faulty or stuck magazine during reloading or immediate action events. Made in U.S.A....

The Magpul GL Enhanced Magazine Well is a high performance purpose built Glock frame magazine well. Designed to fully enhance and ensure positive magazine insertion in high stress scenarios. Sleek and ergonomic design features also provide excellent concealment while ensuring minimal printing to the users clothing. Ramp and edge geometry allow for, should it be needed, positive and flawless removal of a faulty or stuck magazine during reloading or immediate action events. Made in U.S.A....

When installed on the base of a rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide. 3 Pack for MagPuls for 7.62NATO. Fits magazines for rifles such as M14, M1A, FAL, etc....

When installed on the base of a rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide. 3 Pack for MagPuls for 7.62NATO. Fits magazines for rifles such as M14, M1A, FAL, etc....

When installed on the base of a rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide. 3 Pack for MagPuls for 7.62NATO. Fits magazines for rifles such as M14, M1A, FAL, etc....

Featuring the unique wedge block fitment of the Zhukov-S Stock, the MOE AK Stock provides internal storage,optimized QD sling swivel placement, a shock absorbing rubber butt-pad for positive placement, and user-selectable snap on Cheek Risers (sold separately.) Made in U.S.A. Stock counts as one US compliance part for 922(r). Magpul MOE AK STOCK FEATURES Mounts to most stamped receiver AK-47/AKM/AK-74 pattern rifles with fixed stock, single tang trunnion* Minimum weight and bulk with...

35-round capacity with indicator windows at 10, 20, 30, and 35-round intervalsEasy to disassemble design for cleaningHigh-visibility followerAdvanced impact-resistant polymer constructionLong life stainless steel spring for corrosion resistanceImpact-resistant floor platePaint Pen Dot Matrix for magazine identificationMade in U.S.A. Magazine counts as three US compliance parts for 922(r) ...

Magpul PMAG D50 | Best .308 Drum MagMagpul PMAG D-50  LR/SR GEN M3? MAG993The Magpul PMAG D-50 is a rugged, lightweight 50-round polymer drum magazine designed for 7.62x51 NATO/.308 Winchester ammunition for SR25/M110 pattern rifles. It?s capable of using longer-than-SAAMI-spec match ammunition, up to 2.830 OAL, such as M118LR. Engineered to the same exacting standards as the famous Magpul PMAG and PMAG D-60? drum magazines, the D-50 continues the PMAG tradition of high-capacity...

The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56x45 NATO/.223 Remington* polymer drum magazine for AR15/M4 compatible weapons. With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload. The unique drum configuration keeps the height of the magazine manageable as well as allowing for prone firing and easier...

The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56x45 NATO/.223 Remington* polymer drum magazine for AR15/M4 compatible weapons. With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload. The unique drum configuration keeps the height of the magazine manageable as well as allowing for prone firing and easier...