Magpul

The MOE SL Stock Commercial-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using commercial-spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions. Made in U.S.A. FEATURES: Mounts on commercial-spec sized carbine receiver extension tube (not included) from...

The PRS Extended Rubber Buttpad, 0.80" replaces the standard rubber buttpad, adding approximately 0.50" to the original length of pull. Compatible with PRS AR15/M16 and AR10/SR25 models as well as the MOE Rifle Stock and MOE Fixed Carbine Stock. Mounts with existing hardware. Made in U.S.A.>br> E.A.R. Export Administration Regulations Controlled Product

The Rubber Butt-Pad, 0.30" comes standard with the CTR and MOE Mil-Spec models as well as all STR, ACS-L, ACS and UBR stocks and utilizes a firm rubber that is designed for enhanced shoulder purchase and improved impact/drop mitigation. May also be installed on Commercial-Spec MOE/CTR stocks, but may prohibit use of fully collapsed position. All mounting hardware included. Made in U.S.A.

The Rubber Butt-Pad, 0.30" comes standard with the CTR and MOE Mil-Spec models as well as all STR, ACS-L, ACS and UBR stocks and utilizes a firm rubber that is designed for enhanced shoulder purchase and improved impact/drop mitigation. May also be installed on Commercial-Spec MOE/CTR stocks, but may prohibit use of fully collapsed position. All mounting hardware included. Made in U.S.A.

The Extended Rubber Butt-Pad, 0.55" comes standard with the CTR and MOE Commercial-Spec stocks and utilizes a firm rubber that is designed for enhanced shoulder purchase and improved impact/drop mitigation. May also be used with the Mil-Spec models as well as all STR, ACS-L, ACS and UBR stocks for 0.25" increased length-of-pull. All mounting hardware included.

Product DetailsThe Hunter/SGA OEM Butt-Pad Adapter allows the user to replace the factory recoil pad on Magpul SGA Remington or Mossberg Shotgun Stocks as well as the Hunter 700 Stock with a Remington 870 synthetic-pattern butt-pad of their choice (not included).By utilizing the original spacers, this adapter retains all the functionality of the Hunter and SGA Stocks while providing for additional butt-pad options.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product ...

Clip on cheek risers for the MOE and CTR stocks. Raises cheek weld in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions. Made in U.S.A.

Clip on cheek risers for the MOE and CTR stocks. Raises cheek weld in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions. Made in U.S.A.

Clip on cheek risers for the MOE and CTR stocks. Raises cheek weld in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions. Made in U.S.A.

The Magpul PRS2 (Precision Rifle/Sniper) FAL Model is a drop-in, precision-adjustable butt stock especially designed for metric pattern FN FAL rifles and its variants. Designed to offer the fine-tuned, customized feel of a precision target stock, the PRS2 is adjustable for both cheek riser height and length-of-pull without sacrificing the durability necessary to withstand the operational environment. Compared to common plastic fixed stocks, the PRS2 has a similar minimum LOP but can extend up...

Product DetailsCreated as an evolution of the original MOE 1911 Grip Panels, the 1911 Grip Panels with TSP texture offers the user a more aggressive texture allowing for better control of the weapon in all environments.Constructed of heavy-duty reinforced polymer, the grips have a unique diamond-shaped cross section to prevent twisting in the hand, an aggressive magazine release cut-out, aggressive TSP texture (Trapezoidal Surface Projections) for positive control, and are compatible with...

The instructors for Magpul's training division wanted a 1911 grip with advanced features, improved control characteristics, and Magpul value. These grips were designed with their input and testing. Constructed of heavy-duty reinforced polymer, MOE 1911 Grip Panels have a unique diamond-shaped cross section to prevent twisting in the hand, aggressive magazine release cut-out, positive anti-slip texture, and are compatible with ambidextrous safeties. The grips are designed to fit full size...

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments. With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical...

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is " shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its...

Compatible with most any 1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore-Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore-grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. Made in U.S.A. E.A.R. Export...

Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul DynamicsSM. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards. Made in U.S.A. E.A.R. Export Administration Regulations Controlled...

The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon...

Designed for use with MOE Hand Guards and Forends, the MVG is a basic, light weight, cost-effective vertical fore grip that attaches directly to these hand guards without any rail needed. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul Dynamics.SM. All mounting hardware included. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product ...

Designed for use with MOE Hand Guards and Forends, the MVG is a basic, light weight, cost-effective vertical fore grip that attaches directly to these hand guards without any rail needed. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul Dynamics.SM. All mounting hardware included. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product ...

Product DetailsThe RSA QD provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Made from corrosion resistant steel, mounts on 1913 Picatinny rail, and places the attachment point at an angle optimized for comfortable two-point sling use while maintaining easy push-button access.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product ...

Product DetailsThe MSA QD (MOE Sling Attachment QD) attaches directly to MOE Hand Guards and Forends, providing a forward sling attachment point for push-button QD slings such as the MS4 GEN 2. The MSA QD is made from Melonite finished steel for wear and corrosion resistance.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product

The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4...

Product DetailsPush-button quick-detach sling swivel for 1-1/4" webbing, compatible with QD sling attachment points. Manganese-phosphate finished steel. Combine with MS1 Sling for dedicated two-point sling, or with MS1 MS4 Adapter for two to one-point convertible sling.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product

Product DetailsThe Magpul QDM is a heavy-duty upgrade to standard push-button quick detach sling swivels. The innovative design allows for a lower profile sling swivel that offers one-handed manipulation, a high strength bale that rotates freely and canalizes sling webbing to prevent rollover, and superior resistance to corrosion with a Melonite finish.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product ...