Shop By Brand

Fits 5, 10, 20, and 25 round SR25 type 7.62 / .308 metal and polymer mags, made by: Magpul DPMS Knight Armament POF USA Lancer LaRue Tactical C-Products Oberland Arms This loader does not fit early AR10 waffle mags. Benefits: All-in-one magazine speed loader and unloader!: Simple to use in either mode Eliminates thumb pain and injury Eliminates wear on feed lips Prolongs magazine life Lightweight and fits in pocket Reliable in all weather Durable reinforced polymer Tested and combat proven ...

The UpLULA is a military-grade universal pistol magazine loader and unloader designed for loading and unloading virtually all* 9mm Luger up to .45ACP magazines, single and double stack and 1911's of all manufacturers. It will also load most .380ACP double-stack mags. The UpLULA? loader does it all easily, reliably, and painlessly! Loads all* 9mm Luger, .357 Sig, 10mm, .40, and .45ACP cal. single and double stack magazines., including 1911 mags, of all manufacturer, and also loads most .380ACP...

The UpLULA? is a military-grade universal pistol magazine loader and unloader designed for loading and unloading virtually all* 9mm Luger up to .45ACP magazines, single and double stack and 1911?s of all manufacturers. It will also load most .380ACP double-stack mags. The UpLULA? loader does it all easily, reliably, and painlessly! Loads all* 9mm Luger, .357 Sig, 10mm, .40, and .45ACP cal. single and double stack magazines., including 1911 mags, of all manufacturer, and also loads most .380ACP...

The PMAG 30 AR/M4 GEN M2 MOE Window is a 30-round 5.56x45 NATO (.223 Remington) AR15/M4 compatible magazine that offers a cost competitive upgrade from the aluminum USGI. It features an impact resistant polymer construction, easy to disassemble design with a flared floorplate for positive magazine extraction, resilient stainless steel spring for corrosion resistance, and an anti-tilt, self-lubricating follower for increased reliability. Utilizing a high visibility indicator coil on the spring...

The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger. When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes. Made in U.S.A. ITAR International Traffic in Arms Regulations Controlled Product

The Magpul ACS (Adaptable Carbine/Storage) Commercial-Spec Model is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. Dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options.Similar to the Magpul CTR, the ACS also features an anti-snag release latch to prevent accidental activation along with a supplemental friction lock system that minimizes...

The Magpul ACS (Adaptable Carbine/Storage) Mil-Spec Model is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. Dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options. Similar to the Magpul CTR, the ACS also features an anti-snag release latch to prevent accidental activation along with a supplemental friction lock system that minimizes excessive...

The Magpul ACS-L (Adaptable Carbine Stock - Light) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package. Made in U.S.A. FEATURES: Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please...

Product DetailsThe Magpul ACS-L (Adaptable Carbine Stock - Light) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package.Made in U.S.A.ITARInternational Traffic in Arms Regulations Controlled Product ...

Compatible with most any 1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore-Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore-grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. Made in U.S.A. E.A.R. Export...

The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon...

Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The thin profile and lack of backstrap 'beavertail' also makes it an excellent choice...

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Gives the user the option to raise the cheek weld .25 inch in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Gives the user the option to raise the cheek weld .50 inch in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Gives the user the option to raise the cheek weld .50 inch in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Gives the user the option to raise the cheek weld .50 inch in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Gives the user the option to raise the cheek weld .75 inch in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Gives the user the option to raise the cheek weld .75 inch in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

CORROSION-RESISTANT, STAINLESS-STEEL MAGAZINE BODY High-visibility, controlled-tilt follower Stainless-steel spring for longevity and durabilityCAPACITY INDICATORS IN ONE-ROUND INTERVALS STARTING AT FIVE ROUNDS FLARED, EASILY REMOVEABLE FLOORPLATE FOR MAINTENANCE Paint pen dot matrix panel on the bottom to allow for identification marking ...

Product DetailsAmerican-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric...

The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4...

Magpul BipodThe Magpul Bipod for 1903 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed...

Magpul BipodThe Magpul Bipod for 1903 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed...

Magpul BipodThe Magpul Bipod for A.R.M.S.17S Style offers serious strength and versatility at a price that provides unmatched value. It is designed to be used in conjunction with an appropriate 17S-style mounting device that is purchased separately and is used for proper mounting to your weapon system of choice. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and...

Magpul BipodThe Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod...

The Magpul Bolt Action Magazine Well is a drop-in solution for our Remington 700 Hunter Stock for those that are wishing to add detachable box magazine capabilities to their rifle. By simply removing your OEM bottom metal and our spacer from the Hunter 700 Stock, users can add this reinforced polymer trigger guard and magazine well without the need for custom inletting from gunsmiths. Designed to work with AICS pattern, short action magazines. This kit also includes one Magpul PMAG 5 7.62 AC....

The Magpul Bolt Action Magazine Well 700L Magnum is a drop-in detachable box magazine solution for our Hunter 700L Stock. By simply removing your OEM bottom metal from the Hunter 700L, users can add this reinforced polymer trigger guard and magazine well without the need for custom inletting. Designed to work with AICS-pattern long action magazines, this kit also includes one Magpul PMAG 5 AC L, Magnum for .300WM based family of cartridges. Made in the USA. FEATURES Designed specifically for...

The Magpul Bolt Action Magazine Well 700L Standard is a drop-in detachable box magazine solution for our Hunter 700L Stock. By simply removing your OEM bottom metal from the Hunter 700L, users can add this reinforced polymer trigger guard and magazine well without the need for custom inletting. Designed to work with AICS-pattern long action magazines, this kit also includes one Magpul PMAG 5 AC L, Standard for .30-06 based family of cartridges. Made in the USA. FEATURES Designed specifically...

IMPROVES SINGLE-ARMED USE OF LARGE-FORMAT PISTOLS Designed and intended for use as a stabilizing accessory for one-handed firingM-LOK compatible slots for additional sling mounting options Ambidextrous rear QD cup allows sling tension to be applied while firing with one hand to improve stability Toolless, single-handed adjustment SIMPLE, STRONG CONSTRUCTION High-strength polymer and metal construction COMPATIBILITY Mil-Spec sized carbine receiver extension equipped AR Pistols. Not compatible...

The Magpul CTR (Compact/Type Restricted) Commercial-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using commercial-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept...

The Magpul CTR (Compact/Type Restricted) Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any...

Clip on cheek risers for the MOE and CTR stocks. Raises cheek weld in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions. Made in U.S.A.

Clip on cheek risers for the MOE and CTR stocks. Raises cheek weld in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions. Made in U.S.A.

Clip on cheek risers for the MOE and CTR stocks. Raises cheek weld in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions. Made in U.S.A.

Clip on cheek risers for the MOE and CTR stocks. Raises cheek weld in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions. Made in U.S.A.

Clip on cheek risers for the MOE and CTR stocks. Raises cheek weld in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions. Made in U.S.A.

The Essential Wallet is an extension of our Magpul DAKA collection. Made to hold only the cards that are essential to your daily life in one convenient place, eliminating the bulk and clutter of unnecessary cards. This makes finding what you need simple and hassle free. What do you really need to carry with you in your wallet We believe that it is Three ID/Access cards, Three Credit Cards and Three Bills. The single pocket logo side is used to hold up to four ID/access cards and the dual...

The Magpul DAKA Everyday Wallet was designed in the same spirit of our original wallets, but with greater functionality and extra room for those times when you need a little more out of your wallet. Our family of wallets provides a slim, strong, and durable alternative to bulky wallets and overloaded pockets. Like the rest of our Magpul DAKA products, its resistant to just about everything. Our reinforced polymer material holds up to hard use and keeps your everyday essentials secure. For...

The Magpul DAKA Pouch, designed to bring organization to the dusty, dirty, and muddy world we work and play in. Made from polymer infused textiles that are welded on all seams and use a genuine YKK water resistant zipper. The construction methods and materials used mean that these pouches are at home in hard use applications like tool storage or bulk storage of your reloaded ammunition as well as lighter duties like organizing your personal electronic accessories. Although these pouches are...

The Magpul DAKA Pouch, designed to bring organization to the dusty, dirty, and muddy world we work and play in. Made from polymer infused textiles that are welded on all seams and use a genuine YKK water resistant zipper. The construction methods and materials used mean that these pouches are at home in hard use applications like tool storage or bulk storage of your reloaded ammunition as well as lighter duties like organizing your personal electronic accessories. Although these pouches are...

The Magpul DAKA Pouch, designed to bring organization to the dusty, dirty, and muddy world we work and play in. Made from polymer infused textiles that are welded on all seams and use a genuine YKK water resistant zipper. The construction methods and materials used mean that these pouches are at home in hard use applications like tool storage or bulk storage of your reloaded ammunition as well as lighter duties like organizing your personal electronic accessories. Although these pouches are...

REINFORCED POLYMER FABRIC WITH ANTI-SLIP TEXTUREOur unique polymer-infused material protects your stuff from exposure, moisture, and from getting lost.Paint pen dot matrix debossed into body for identification markingEASY TO KEEP ORGANIZEDTranslucent window on one sideCarabiner attachment points 550 PARACORD & HEAT SHRINK TUBING FOR ENHANCED GRIP Rugged but easy to open and close zipper WELDED CONSTRUCTION AND YKK AQUAGUARD® ZIPPER Impenetrable seals on all sides and a water repellent zipper...

NEXT GEN AR STOCK Mounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others NEW LOP-ADJUSTMENT DUAL TENSION LOCKING SYSTEM Improves ease of adjustment while securing LOP placement, limiting secondary movements, and improving durability Single, anti-snag ambidextrous control lever ENHANCED ERGONOMICS Newly designed non-slip butt-pad with optimized curvature allows for easier shoulder transitions and better fit when...

The Magpul AR Enhanced Magazine Release provides an enlarged contact surface for quick and fumble free magazine changes. With easy bolt-on installation with no gunsmithing required, the Enhanced AR Magazine Release is made of Mil-Spec hard anodized aluminum to provide durability and light weight. Features: Machined from mil-spec anodized aluminum Two-piece construction for easy installation and reduced profile Provides larger contact surface for positive activation Compatible with most 5.56...

The Extended Rubber Butt-Pad, 0.55" comes standard with the CTR and MOE Commercial-Spec stocks and utilizes a firm rubber that is designed for enhanced shoulder purchase and improved impact/drop mitigation. May also be used with the Mil-Spec models as well as all STR, ACS-L, ACS and UBR stocks for 0.25" increased length-of-pull. All mounting hardware included.

The Magpul Enhanced Self-Leveling Follower is a drop in replacement for the aluminum USGI 30-round magazine black or green follower.Featuring a patent pending 4-way anti-tilt design for increased feeding reliability, the Enhanced Self-Leveling Follower is made from a non-hygroscopic and self-lubricating polymer.Made in the U.S.A.ITARInternational Traffic in Arms Regulations Controlled Product