Shop By Brand

The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15/M16 platform. FEATURES: Impact resistant polymer construction provides light weight and resists operational abuse Spring-loaded flip up sight easily activated from either side or by pressing the top Detent and spring pressure keeps sight erect but allows for...

The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15/M16 platform. FEATURES: Impact resistant polymer construction provides light weight and resists operational abuse Spring-loaded flip up sight easily activated from either side or by pressing the top Detent and spring pressure keeps sight erect but allows for...

The MBUS 3 Rear Sight sits at standard AR-height when deployed and includes a windage adjustable, rapid-select aperture system. FULL-FEATURED SPRING-LOADED FLIP UP SIGHT Ambidextrous push-button deployment and rapid-select rear aperture system 0.55” high when folded and 1.38” wide at widest point Standard AR-height when deployed IMPACT-RESISTANT POLYMER CONSTRUCTION Polymer construction, smaller size provides light weight and resists operational abuseCLAMPS TO MOST MIL-STD-1913 PICATINNY RAILS...

The MBUS 3 Front Sight sits at standard AR-height when deployed and includes tool-less elevation adjustment of a dual width enhanced front post similar to the MBUS Pro. FULL-FEATURED SPRING-LOADED FLIP UP SIGHT Tool-less elevation adjustment and dual width enhanced front sight post, similar to MBUS Pro 0.47” high when folded and 1.38” wide at widest point Standard AR-height when deployed IMPACT-RESISTANT POLYMER CONSTRUCTIONPolymer construction, smaller size provides light weight and resists...

Product DetailsThe MBUS Pro (Magpul Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size.The dual aperture, windage adjustable Rear and no-tool, elevation adjustable Front excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks. Positive detents keep the MBUS Pro Front and Rear at standard AR sight height when deployed, and so...

Product DetailsThe MBUS Pro (Magpul Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size.The dual aperture, windage adjustable Rear and no-tool, elevation adjustable Front excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks. Positive detents keep the MBUS Pro Front and Rear at standard AR sight height when deployed, and so...

Product DetailsThe new MBUS Pro LR capitalizes on the low profile and sleek styling of the original MBUS Pro, while adding the additional feature of an elevation adjustment wheel to accurately engage targets at variable distances.Built with all steel construction, this is the sighting solution that delivers no-tool adjustments, maximum strength, corrosion resistance, and functionality in a compact package. Positive detents keep the MBUS Pro LR at standard AR sight height when deployed and so...

Product DetailsBuilding on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution.The MBUS Pro Offset Front Sight features durable Melonited steel construction, positive detented lockup when deployed, tool-less...

Product DetailsBuilding on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution.The MBUS Pro Offset Rear Sight features durable Melonited steel construction, positive detented lockup when deployed, tool-less...

The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15/M16 platform. FEATURES: Impact resistant polymer construction provides light weight and resists operational abuse Spring-loaded flip up sight easily activated from either side or by pressing the top Detent and spring pressure keeps sight erect but allows for...

The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15/M16 platform. FEATURES: Impact resistant polymer construction provides light weight and resists operational abuse Spring-loaded flip up sight easily activated from either side or by pressing the top Detent and spring pressure keeps sight erect but allows for...

Product DetailsThe Enhanced Trigger Guard is a black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The Enhanced Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. All mounting hardware included.Made in U.S.A.ITARInternational Traffic in Arms Regulations Controlled Product ...

The MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15/AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs. This update to the original MIAD has improved strap retention and also comes standard with...

The MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15/AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs. This update to the original MIAD has improved strap retention and also comes standard with...

The MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15/AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs. This update to the original MIAD has improved strap retention and also comes standard with...

The MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15/AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs. This update to the original MIAD has improved strap retention and also comes standard with...

The MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15/AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs. This update to the original MIAD has improved strap retention and also comes standard with...

Product DetailsInternal core unit for the MIAD as well as the MOE, MOE+, MOE-K2, and MOE AK Grips designed to hold two (2) AA type batteries in a self contained, water resistant unit. Included internal spacer provides rattle free storage of either (2) AAA or (2) N size batteries (commonly used for EOTech sights). Rubber cap has two sides with marking to identify "spent" batteries and can be opened with a push of the thumb.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product ...

Product DetailsInternal core unit for the MIAD as well as the MOE and MOE-K2 Grips* designed to hold one (1) standard AR15/M4 complete bolt and firing pin.Made in U.S.A. E.A.R.Export Administration Regulations Controlled Product

Internal core unit for the MIAD as well as the MOE, MOE-K2, and MOE AK Grips* designed to hold two (2) CR123A lithium type, AA or AAA batteries, a bolt and firing pin or lubricant bottle in a self contained, water resistant unit. Rubber cap is captured to the unit and can be opened with a push of the thumb. E.A.R. Export Administration Regulations Controlled Product

The PMAG Minus 10 Round Limiter installs in 10, 20, or 25 round 7.62x51 LR/SR GEN M3 PMAG bodies, reducing the magazine capacity by ten rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body. NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG LR/SR GEN M3 magazines. This product does not constitute a permanent capacity...

The PMAG Minus 5 Round Limiter installs in 10, 20, or 25 round 7.62x51 LR/SR GEN M3 PMAG bodies, reducing the magazine capacity by five rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body. NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG LR/SR GEN M3 magazines. This product does not constitute a permanent capacity...

The PMAG Minus 5 and 10 Round Limiters install in GEN M3 PMAG bodies, reducing the magazine capacity by five and ten rounds respectively. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body. Made in U.S.A. NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent...

The PMAG Minus 5 and 10 Round Limiters install in GEN M3 PMAG bodies, reducing the magazine capacity by five and ten rounds respectively. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body. Made in U.S.A. NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent...

Ambidextrous platform to mount weapons lights on M-LOK compatible hand guards and forendsProprietary heavy-duty polymerFeatures beveled ends and corners to reduce snagging and sharp edgesAllows for the direct attachment of the Surefire M300-600 series of Scout Lights or other MIL-STD-1913 Picatinny light and optic mount

Product DetailsCreated as an evolution of the original MOE 1911 Grip Panels, the 1911 Grip Panels with TSP texture offers the user a more aggressive texture allowing for better control of the weapon in all environments.Constructed of heavy-duty reinforced polymer, the grips have a unique diamond-shaped cross section to prevent twisting in the hand, an aggressive magazine release cut-out, aggressive TSP texture (Trapezoidal Surface Projections) for positive control, and are compatible with...

The instructors for Magpul's training division wanted a 1911 grip with advanced features, improved control characteristics, and Magpul value. These grips were designed with their input and testing. Constructed of heavy-duty reinforced polymer, MOE 1911 Grip Panels have a unique diamond-shaped cross section to prevent twisting in the hand, aggressive magazine release cut-out, positive anti-slip texture, and are compatible with ambidextrous safeties. The grips are designed to fit full size...

A drop-in upgrade for AK-pattern pistol grips, the MOE AK Grip is designed to improve ergonomics and comes with an aggressive TSP texture for positive weapon control. With a one-piece reinforced polymer construction and compatibility with Magpul Grip Cores for storage customization, this MOE grip provides a welcome addition to the iconic AK platform. Made in U.S.A. Grip counts as one US compliance part for 922(r). FEATURES Drop-in upgrade for AK47/AK74 pistol grips* Fits both milled and...

The Magpul MOE AK Hand Guard is a replacement for standard AK pattern rifles without a front sling loop on the hand guard retainer. Featuring an extended gripping portion, integrated heat shield, M-LOK mounting capability, and replacement gas tube cover, the MOE AK Hand Guard is an upgrade to any AK pattern rifle. Made in U.S.A. Hand Guard counts as one US compliance part for 922(r). FEATURES Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards*...

The MOE AK+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. A drop-in upgrade for AK-pattern pistol grips, the MOE AK+ Grip is designed to improve ergonomics and weapon control, and borrows the rubber overmolded surface of the popular MOE+ AR15/M4 grip to ensure a positive and comfortable hold on the weapon. Compatible with Magpul Grip Cores for storage customization. Made in U.S.A. Grip...

The Magpul MOE AKM Hand Guard is a replacement for original stamped receiver AK-47/AKM/AK-74 pattern rifles with a front sling loop on the hand guard retainer. Featuring an extended gripping portion, integrated heat shield, M-LOK mounting capability, and replacement gas tube cover, the MOE AKM Hand Guard is an upgrade to any AK pattern rifle. Made in U.S.A. Hand Guard counts as one US compliance part for 922(r). FEATURES Optimized design replaces original stamped receiver AK-47/AKM/AK-74...

 DEPENDABLE AR STOCK Mounts on Com-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others SECURE FIT Premium chrome-silicon lock spring provides positive locking and long service life THE RIGHT BALANCE OF CHEEK WELD AND COMFORT Sloping cheek weld combines a slim profile with user comfort SET IT AND FORGET IT Shielded release latch prevents snagging and accidental operation IMPACT MITIGATION Removable 0.55" Extended...

Made in U.S.A. FEATURES: Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others (please see the note below) Sloping cheek weld combines a slim profile with user comfort Shielded release latch prevents snagging and accidental operation Premium chrome-silicon lock spring provides positive locking and long service life Side mounting slots accept optional cheek risers for NON AR15/M4 applications Removable 0.30"...

The MOE Fixed Carbine Stock Mil-Spec Model (Magpul Original Equipment) provides an inexpensive, fixed, non-collapsing stock option for mil-spec size carbine-length buffer tubes. The MOE Fixed Carbine Stock has a slim profile, improved cheek weld, and multiple sling attachment options, and is compatible with ASAP Plates and PRS Extended Rubber Butt-Pad. Installation is non-armorer and does not require the castle nut or lock plate to be removed. Made in U.S.A. FEATURES Fixed length for standard...

The MOE Fixed Carbine Stock Mil-Spec Model (Magpul Original Equipment) provides an inexpensive, fixed, non-collapsing stock option for mil-spec size carbine-length buffer tubes. The MOE Fixed Carbine Stock has a slim profile, improved cheek weld, and multiple sling attachment options, and is compatible with ASAP Plates and PRS Extended Rubber Butt-Pad. Installation is non-armorer and does not require the castle nut or lock plate to be removed. Made in U.S.A. FEATURES Fixed length for standard...

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip...

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip...

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip...

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip...

The MOE Stock Commercial-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M4 carbines using commercial-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The Commercial-Spec Model includes an extended 0.55" thick rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most...

BIGGER SIZE SUPPORTS LARGER GRIP NEEDS Approximately 25% larger than MOE-K2 Grip More vertical angle provides optimal hand position for modern shooting techniques BEAVERTAIL BACKSTRAP FOR ENHANCED ERGONOMICS Design supports proper trigger finger placement STORAGE CORE CAPABILITY ACCEPTS PROPRIETARY XL GRIP CAP AND OIL BOTTLE GRIP CORE Not compatible with current grip cores ITAR International Traffic in Arms Regulations Controlled Product ...

The MOE M-LOK Forend is a drop-in replacement for the standard Remington 870 12ga shotgun, featuring an extended length and front/rear hand stops for improved weapon manipulation. Now updated with M-LOK slots for compatibility with all M-LOK accessories, this Forend adds modularity to the proven Remington 870 platform for sporting use, home defense, or on duty. NOTE: Not compatible with the Remington 870 Super Mag. Made in U.S.A. FEATURES Compatible with Remington 870 12ga shotguns Reinforced...

The MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1* 12ga shotguns, featuring an extended length and front/rear hand stops for improved weapon manipulation. Now updated with M-LOK slots for compatibility with all M-LOK accessories, this Forend adds modularity to the proven Mossberg platform for sporting use, home defense, or on duty. Made in U.S.A. FEATURES Compatible with Mossberg 590/590A1 12ga shotguns* Reinforced polymer construction Increased length for improved pump...

The MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1* 12ga shotguns, featuring an extended length and front/rear hand stops for improved weapon manipulation. Now updated with M-LOK slots for compatibility with all M-LOK accessories, this Forend adds modularity to the proven Mossberg platform for sporting use, home defense, or on duty. Made in U.S.A. FEATURES Compatible with Mossberg 590/590A1 12ga shotguns* Reinforced polymer construction Increased length for improved pump...

The MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1* 12ga shotguns, featuring an extended length and front/rear hand stops for improved weapon manipulation. Now updated with M-LOK slots for compatibility with all M-LOK accessories, this Forend adds modularity to the proven Mossberg platform for sporting use, home defense, or on duty. Made in U.S.A. FEATURES Compatible with Mossberg 590/590A1 12ga shotguns* Reinforced polymer construction Increased length for improved pump...

The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M4 firearms with carbine-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides...