Stocks

The Magpul ACS (Adaptable Carbine/Storage) Commercial-Spec Model is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. Dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options.Similar to the Magpul CTR, the ACS also features an anti-snag release latch to prevent accidental activation along with a supplemental friction lock system that minimizes...

The Magpul ACS (Adaptable Carbine/Storage) Mil-Spec Model is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. Dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options. Similar to the Magpul CTR, the ACS also features an anti-snag release latch to prevent accidental activation along with a supplemental friction lock system that minimizes excessive...

The Magpul ACS-L (Adaptable Carbine Stock - Light) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package. Made in U.S.A. FEATURES: Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please...

Product DetailsThe Magpul ACS-L (Adaptable Carbine Stock - Light) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package.Made in U.S.A.ITARInternational Traffic in Arms Regulations Controlled Product ...

Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The thin profile and lack of backstrap 'beavertail' also makes it an excellent choice...

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Gives the user the option to raise the cheek weld .25 inch in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Gives the user the option to raise the cheek weld .50 inch in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Gives the user the option to raise the cheek weld .50 inch in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Gives the user the option to raise the cheek weld .50 inch in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Gives the user the option to raise the cheek weld .75 inch in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Gives the user the option to raise the cheek weld .75 inch in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

The Magpul Bolt Action Magazine Well is a drop-in solution for our Remington 700 Hunter Stock for those that are wishing to add detachable box magazine capabilities to their rifle. By simply removing your OEM bottom metal and our spacer from the Hunter 700 Stock, users can add this reinforced polymer trigger guard and magazine well without the need for custom inletting from gunsmiths. Designed to work with AICS pattern, short action magazines. This kit also includes one Magpul PMAG 5 7.62 AC....

The Magpul Bolt Action Magazine Well 700L Standard is a drop-in detachable box magazine solution for our Hunter 700L Stock. By simply removing your OEM bottom metal from the Hunter 700L, users can add this reinforced polymer trigger guard and magazine well without the need for custom inletting. Designed to work with AICS-pattern long action magazines, this kit also includes one Magpul PMAG 5 AC L, Standard for .30-06 based family of cartridges. Made in the USA. FEATURES Designed specifically...

IMPROVES SINGLE-ARMED USE OF LARGE-FORMAT PISTOLS Designed and intended for use as a stabilizing accessory for one-handed firingM-LOK compatible slots for additional sling mounting options Ambidextrous rear QD cup allows sling tension to be applied while firing with one hand to improve stability Toolless, single-handed adjustment SIMPLE, STRONG CONSTRUCTION High-strength polymer and metal construction COMPATIBILITY Mil-Spec sized carbine receiver extension equipped AR Pistols. Not compatible...

The Magpul CTR (Compact/Type Restricted) Commercial-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using commercial-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept...

The Magpul CTR (Compact/Type Restricted) Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any...

Clip on cheek risers for the MOE and CTR stocks. Raises cheek weld in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions. Made in U.S.A.

Clip on cheek risers for the MOE and CTR stocks. Raises cheek weld in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions. Made in U.S.A.

Clip on cheek risers for the MOE and CTR stocks. Raises cheek weld in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions. Made in U.S.A.

Clip on cheek risers for the MOE and CTR stocks. Raises cheek weld in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions. Made in U.S.A.

Clip on cheek risers for the MOE and CTR stocks. Raises cheek weld in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions. Made in U.S.A.

NEXT GEN AR STOCK Mounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others NEW LOP-ADJUSTMENT DUAL TENSION LOCKING SYSTEM Improves ease of adjustment while securing LOP placement, limiting secondary movements, and improving durability Single, anti-snag ambidextrous control lever ENHANCED ERGONOMICS Newly designed non-slip butt-pad with optimized curvature allows for easier shoulder transitions and better fit when...

The Extended Rubber Butt-Pad, 0.55" comes standard with the CTR and MOE Commercial-Spec stocks and utilizes a firm rubber that is designed for enhanced shoulder purchase and improved impact/drop mitigation. May also be used with the Mil-Spec models as well as all STR, ACS-L, ACS and UBR stocks for 0.25" increased length-of-pull. All mounting hardware included.

The Rubber Butt-Pad, 0.30" comes standard with the CTR and MOE Mil-Spec models as well as all STR, ACS-L, ACS and UBR stocks and utilizes a firm rubber that is designed for enhanced shoulder purchase and improved impact/drop mitigation. May also be installed on Commercial-Spec MOE/CTR stocks, but may prohibit use of fully collapsed position. All mounting hardware included. Made in U.S.A.

Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true drop-in solution for the end user*. This stock is also M-LOK compatible to accept a broad range of accessories. Also available is our Bolt Action Magazine Well, which allows the...

Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true drop-in solution for the end user*. This stock is also M-LOK compatible to accept a broad range of accessories. Also available is our Bolt Action Magazine Well, which allows the...

Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true drop-in solution for the end user*. This stock is also M-LOK compatible to accept a broad range of accessories. Also available is our Bolt Action Magazine Well, which allows the...

Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true drop-in solution for the end user*. This stock is also M-LOK compatible to accept a broad range of accessories. Also available is our Bolt Action Magazine Well, which allows the...

Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Hunter 700L Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Long Actions, this stock requires no bedding and is a true drop-in solution for the end user*. The 700L is also M-LOK compatible to accept a broad range of accessories. Also compatible with our Bolt Action Magazine Well 700L which allows the rifle...

Continuing the Hunter lineage, Magpul introduces the Hunter American stock. Made from reinforced polymer and an anodized aluminum bedding block with steel recoil lugs. The Magpul Hunter American stock offers users a cost-effective replacement featuring a fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Ruger American Short Action rifles, this stock requires no bedding and is a true drop-in solution for the end user. This stock is also M-LOK compatible to...

The Magpul Hunter X-22 chassis is an ergonomic, full-featured stock for the ubiquitous Ruger 10/22 rifle. Made from high quality reinforced polymer, the Hunter X-22 features an ergonomic grip, adjustable length of pull and comb height to fit a wide variety of shooters, multiple sling mounting options, a non-slip rubber butt-pad, and M-LOK slots for accessory attachment. The Hunter X-22 fits standard Ruger 10/22 .22 LR pattern rifles with no gunsmithing, and a reversible barrel tray ensures...

The Magpul Hunter X-22 Takedown chassis is an ergonomic, full-featured stock specifically designed for the Ruger 10/22 Takedown series of rifles. Made from high quality reinforced polymer, the Hunter X-22 Takedown features an ergonomic grip, adjustable length of pull and comb height to fit a wide variety of shooters, multiple sling mounting options, a non-slip rubber butt-pad, and M-LOK slots for accessory attachment. , The Hunter X-22 Takedown fits standard Ruger 10/22 Takedown .22 LR pattern...

Product DetailsThe Hunter/SGA OEM Butt-Pad Adapter allows the user to replace the factory recoil pad on Magpul SGA Remington or Mossberg Shotgun Stocks as well as the Hunter 700 Stock with a Remington 870 synthetic-pattern butt-pad of their choice (not included).By utilizing the original spacers, this adapter retains all the functionality of the Hunter and SGA Stocks while providing for additional butt-pad options.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product ...

The Magpul L-Plate is a floorplate replacement for current issue aluminum USGI 30-round magazines that incorporates a rubberized pad. Bumper pad is made of durable Santoprene rubber overmolded onto a stainless steel plate. Bumper pad is made of durable Santoprene rubber overmolded onto a stainless steel plate. Made in the U.S.A. ITAR International Traffic in Arms Regulations Controlled Product.

The M-LOK Tripod Adapter for metal M-LOK compatible hand guards or forends mounts directly onto any tripod head equipped with the common Manfrotto RC2/Q2 interface. This adapter allows the user to mount their rifle directly to a tripod head without the use of any additional saddles giving them a secure shooting platform. The M-LOK Tripod Adapter is machined from aluminum and finished in Mil-Spec anodizing which offers excellent corrosion resistance. The beveled ends and corners produce a...

Featuring the unique wedge block fitment of the Zhukov-S Stock, the MOE AK Stock provides internal storage,optimized QD sling swivel placement, a shock absorbing rubber butt-pad for positive placement, and user-selectable snap on Cheek Risers (sold separately.) Made in U.S.A. Stock counts as one US compliance part for 922(r). Magpul MOE AK STOCK FEATURES Mounts to most stamped receiver AK-47/AKM/AK-74 pattern rifles with fixed stock, single tang trunnion* Minimum weight and bulk with...

 DEPENDABLE AR STOCK Mounts on Com-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others SECURE FIT Premium chrome-silicon lock spring provides positive locking and long service life THE RIGHT BALANCE OF CHEEK WELD AND COMFORT Sloping cheek weld combines a slim profile with user comfort SET IT AND FORGET IT Shielded release latch prevents snagging and accidental operation IMPACT MITIGATION Removable 0.55" Extended...

Made in U.S.A. FEATURES: Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others (please see the note below) Sloping cheek weld combines a slim profile with user comfort Shielded release latch prevents snagging and accidental operation Premium chrome-silicon lock spring provides positive locking and long service life Side mounting slots accept optional cheek risers for NON AR15/M4 applications Removable 0.30"...

Product DetailsThe MOE Rifle Stock (Magpul Original Equipment) is a drop-in replacement for AR15/M16 A1 and A2 rifle stocks utilizing the standard rifle-length receiver extension (buffer tube).Designed as a basic upgrade, the stock features integral 1.25" sling loop, optional dual-side front and rear QD mounting points, replaceable anti-slip rubberized butt-pad, and internal storage compartment accessible through the rear storage door.Made in U.S.A.ITARInternational Traffic in Arms Regulations...

The MOE SL Stock Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions. Made in U.S.A. FEATURES: Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such...

The MOE SL Stock Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions. Made in U.S.A. FEATURES: Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such...

The MOE SL Stock Commercial-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using commercial-spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions. Made in U.S.A. FEATURES: Mounts on commercial-spec sized carbine receiver extension tube (not included) from...

It includes a unique, ambidextrous release latch that is shielded to prevent accidental deployment and minimizes rattle on the receiver extension without requiring additional locks, levers, or springs. The 1.25" footman's loop accepts an optional M-LOK® QD Sling Mount for push-button style QD sling swivels.Made in the USA. IDEAL FOR PDW PLATFORMS Internal release latch feature mitigates rattle and wobble Ambidextrous shielded adjustment lever Angled toe for easy shouldering RUGGED CONSTRUCTION...

The storage-capable version of the flagship Magpul MOE SL carbine stock, the MOE SL-S (Storage) Stock is a direct replacement buttstock for AR15/M4 carbines. The sleek profile, dual-side release latches, and waterproof battery tubes make it the slimmest storage tube stock available. The SL-S provides an enhanced cheek weld and true, O-ring sealed, 10m waterproof storage area desired by many, but fits it into the narrowest package possible to allow a more upright head position and minimize...

The MOE X-22 fits standard Ruger 10/22 .22 LR pattern rifles and comes with two different diameter barrel trays to support both factory pencil and bull-barrel profiles to provide shooters with options for various configurations. Made in the USA. LIGHTWEIGHT BUT DURABLE POLYMER CONSTRUCTION Lightweight at a little over a pound Includes two M-LOK slots for accessory attachment Interchangeable barrel trays accept all factory barrels as well as aftermarket up to 0.920" diameter (12.5" minimum...

Product DetailsSupplemental Impact/Dust Covers for the 5.56x45 PMAG 30 AR/M4 GEN M2 MOE, PMAG 20, and EMAG, designed to minimize debris intrusion and protect against potential cartridge damage during storage and transit.Made in U.S.A.ITARInternational Traffic in Arms Regulations Controlled Product

The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG and EMAG that incorporates an integral loop similar to the original Magpul USGI Ranger. When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes. Made in U.S.A. ITAR International Traffic in Arms Regulations Controlled Product