Magpul

Product DetailsPush-button quick-detach sling swivel for 1-1/4" webbing, compatible with QD sling attachment points. Manganese-phosphate finished steel. Combine with MS1 Sling for dedicated two-point sling, or with MS1 MS4 Adapter for two to one-point convertible sling.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product

Product DetailsThe Magpul QDM is a heavy-duty upgrade to standard push-button quick detach sling swivels. The innovative design allows for a lower profile sling swivel that offers one-handed manipulation, a high strength bale that rotates freely and canalizes sling webbing to prevent rollover, and superior resistance to corrosion with a Melonite finish.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product ...

The Magpul Ranger Plate is a floorplate replacement for current issue aluminum USGI 30-round magazines that incorporates an integral loop, floorplate lock, and mag identifier. When installed on the base of a magazine, the Magpul Ranger provides unsurpassed speed and controllability during high stress magazine changes. The loop made of pliable Santoprene overmolded onto a stainless steel plate. Patended design based upon the tried and true para-cord loops and duct-tape tabs currently in use...

Product DetailsThe RSA QD provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Made from corrosion resistant steel, mounts on 1913 Picatinny rail, and places the attachment point at an angle optimized for comfortable two-point sling use while maintaining easy push-button access.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product ...

The Rubber Butt-Pad, 0.30" comes standard with the CTR and MOE Mil-Spec models as well as all STR, ACS-L, ACS and UBR stocks and utilizes a firm rubber that is designed for enhanced shoulder purchase and improved impact/drop mitigation. May also be installed on Commercial-Spec MOE/CTR stocks, but may prohibit use of fully collapsed position. All mounting hardware included. Made in U.S.A.

Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul DynamicsSM. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards. Made in U.S.A. E.A.R. Export Administration Regulations Controlled...

The Magpul RVG M-LOK Adapter Rail is a polymer M-LOK accessory rail that is optimized for the attachment of the Magpul RVG to all M-LOK compatible hand guards and forends. Molded of the same high quality material as other Magpul Polymer Rails, the RVG M-LOK Adapter Rail has the same footprint as the RVG and lower profile than a standard Picatinny Rail to ensure a seamless transition between the different components. All hardware necessary for attachment directly to M-LOK slots on compatible...

The SGA Stock is an ambidextrous, user-configurable buttstock designed to add much-needed adjustability to the tried and true Remington 870 12ga shotgun. Featuring a spacer system for length of pull adjustment, improved grip ergonomics, recoil-reducing butt-pad, optional cheek risers for use with optics/raised sights, and other accessories, the SGA 870 brings Magpul design and engineering to another classic American firearm. Available in Black, Flat Dark Earth, Stealth Gray and Orange to adapt...

he Hunter/SGA Low Cheek Riser Kit for the Magpul Hunter X-22 Stock and SGA Shotgun Stocks allows the user to configure their firearm with the ideal cheek piece height to accommodate a wide range of sight/optic configurations and shooter preferences.The Riser Kits are available in two configurations, Low and High. This Low kit includes: One (1) 0.25" cheek riser One (1) 0.50" cheek riser Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product ...

he Hunter/SGA Low Cheek Riser Kit for the Magpul Hunter X-22 Stock and SGA Shotgun Stocks allows the user to configure their firearm with the ideal cheek piece height to accommodate a wide range of sight/optic configurations and shooter preferences.The Riser Kits are available in two configurations, Low and High. This Low kit includes: One (1) 0.25" cheek riser One (1) 0.50" cheek riser Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product ...

The SGA Stock is an ambidextrous, user-configurable buttstock designed to add much-needed adjustability to the tried and true Mossberg 500/590/590A1 12ga series of shotguns. Featuring a spacer system for length of pull adjustment, improved grip ergonomics, recoil-reducing butt-pad, optional cheek risers for use with optics/raised sights, and other accessories, the Mossberg SGA brings Magpul design and engineering to another classic American firearm. Available in Black, Flat Dark Earth, and...

The SGA Stock is an ambidextrous, user-configurable buttstock designed to add much-needed adjustability to the tried and true Remington 870 12ga shotgun. Featuring a spacer system for length of pull adjustment, improved grip ergonomics, recoil-reducing butt-pad, optional cheek risers for use with optics/raised sights, and other accessories, the SGA 870 brings Magpul design and engineering to another classic American firearm. Available in Black, Flat Dark Earth, Stealth Gray and Orange to adapt...

Product DetailsSling Mount Kit TYPE 1 can be added to either side of the SGA, MOE Rifle, MOE Fixed Carbine, MOE AK, Zhukov-S, Hunter 700, and Hunter X-22 Stocks for use with push-button QD Sling Swivels or our own Magpul QDM.Heavy-duty black phosphatized steel construction easily installs with provided hardware. Swivels not included.Made in U.S.A.E.A.R.Export Administration Regulations Controlled Product ...

The patent-pending Speedthreader is designed to dramatically improve the speed and ease of configuring MOLLE/PALS webbing. The device clips onto the strap of a modular pouch and guides it smoothly through the vest webbing for hassle-free interlacing. Speedthreader can attach a two-strap pouch (interlaced correctly) in about 60 seconds. Can also be used as a Go/No Go gauge for webbing. NSN: MAG220 NEEDLE, VEST 8465-01-565-4798 Made in U.S.A. E.A.R. Export Administration Regulations Controlled...

The Magpul STR (Storage/Type Restricted) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A storage-capable version of the CTR, the STR has improved cheek weld and two water resistant battery tubes on a compact, reinforced polymer A-frame design. A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR...

The Magpul STR (Storage/Type Restricted) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A storage-capable version of the CTR, the STR has improved cheek weld and two water resistant battery tubes on a compact, reinforced polymer A-frame design. A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR...

The Magpul STR (Storage/Type Restricted) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A storage-capable version of the CTR, the STR has improved cheek weld and two water resistant battery tubes on a compact, reinforced polymer A-frame design. A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR...

The UBR GEN2 is an adjustable stock for the AR15/M4, designed to offer the same strength and stability as a fixed stock with a consistent and comfortable cheek weld in any position. An update of the revolutionary Utility/Battle Rifle (UBR) stock, the UBR GEN2 features a fixed cheek piece to provide a consistent cheek weld in any of its eight positions, and is compatible with Carbine as well as A5-length buffer systems. Designed to accommodate large bore AR calibers and withstand severe...

DESIGNED AND INTENDED FOR LIGHT/LASER CABLE MANAGEMENT Half-slot size allows for precise positioning CAN BE RECONFIGURED MULTIPLE TIMES Six (6) assemblies per package

DESIGNED AND INTENDED FOR LIGHT/LASER CABLE MANAGEMENT Half-slot size allows for precise positioning CAN BE RECONFIGURED MULTIPLE TIMES Six (6) assemblies per package

The Magpul X-22 Backpacker stock takes the function of our full-size Hunter X-22 Takedown, and pares it down for ease of storage and transportation. Made for the Ruger 10/22 Takedown rifle, the X-22 Backpacker offers a minimalist solution for the hunter or outdoorsman who wants to transport their rifle in an efficient, convenient package without compromising shooting performance. Constructed of a durable advanced polymer, the X-22 Backpacker features an ergonomic hand guard, optional QD sling...

XT Rail Panels offer low-profile 1913 Picatinny rail coverage. The semi-rubbery material offers improved weapon control and rail protection. Easily cut for custom lengths, sections can mount next to each other to form a visually continuous cover. Each panel fits one side of a carbine-length rail. One panel per package. Available in Black, Foliage, FDE and ODG. E.A.R. Export Administration Regulations Controlled Product

Each set comes with (4) two-piece panels which will cover ONE side of a carbine rail. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product

The four-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel. Made in U.S.A. E.A.R. Export Administration Regulations Controlled Product ...

The Magpul Zhukov Hand Guard is a fully-featured AK forearm for the modern AK. The Zhukov Hand Guard casts aside traditional AK forearm shortcomings and offers an extended option for modern shooting techniques, an aluminum chassis for strength and heat dispersion, a comfortable injection molded exterior for superior ergonomics, and M-LOK slots for optimized accessory attachment. Compatible with the Ultimak gas tube rail for optics mounting, the Zhukov Hand Guard redefines functionality for the...

The YUGO Zhukov-S Stock's hinge block for fixed-stock Yugoslavian pattern rifles allows the user to replace their factory buttstock with this high quality folding polymer replacement. The hinge block mounts directly to the unique rear interface of Yugo pattern rifles with the included hardware providing a very robust fit. A no-compromise folding stock for the modern AK, the Zhukov-S Stock folds to the right, has adjustable comb height for optics use via optional cheek risers, is adjustable for...

The Magpul Zhukov-S Stock is a no-compromise folding stock for the modern AK. The Zhukov-S Stock casts aside traditional AK stock shortcomings and offers a folding, collapsible stock with QD sling mounts, modular Cheek Risers, and a shock-absorbing rubber butt-pad for superior traction. The Zhukov-S has right-side folding for compatibility with side-mounted optics. Designed to fit most common stamped AK receivers without modification via a unique wedge block, the durable injection molded...